| Support |
|
|
| Sync Out of Range ( for all models ) |
| 2008/12/10 |
You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate.
more |
|
 |
|
|
| Fuzzy/Blurry/Unclear/Unfocused/Shadowing/Ghosting Display |
| 2008/12/10 |
The Display was pre-adjusted in the factory with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable and/or unclear display when a new display mode or new VGA card is selected
more |
|
|
|
|
| Split Image |
| 2008/12/10 |
Make sure your graphics card is set to non-interlaced mode.
more |
|
|
|
|
| Scrolling Image |
| 2008/12/10 |
Make sure the video input signals are within the monitor's specified frequency range.
Try the monitor with another power source and/or computer system.
more |
|
|
|
|
| Wrong or abnormal colors |
| 2008/12/10 |
If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Losses or broken pins in the cable connector could cause an improper connection.
more |
|
|
|
|
| Power is ON but no screen image |
| 2008/12/10 |
Make sure the video cable supplied with the Display is tightly secured to the video output port on the back of computer. If the other end of the video cable is not attached permanently to the Display, tightly secure it to the Display.
more |
|
|
|
|
1
|
2
 Total 14 , page 1 of 2
|
|
| |
|
|
|
|
 |
|
| Location |
| Digimate House 1, Chancery Gate Business Centre, Stonefield Way, Ruislip, London, HA4 0JA |
| Service hot line |
 0871 250 8000 |
|
| Main Office Tel |
| 0871 250 6000 |
|
| FAX |
| 0871 250 7000 |
|
|
 |
| How to find DGM With Multimap? |
|
|
FAQ & Support
